Partition walls:

Showing all 3 results

Show

  • Glass Panel Walls

    The glass panel wall system by ultra-med adopted is completely flush-mounted and perfectly integrated with the other partition walls that are installed adjacent to the same. A completely concealed fixing and installation system and a minimal perimeter frame complete the product.

    They are used for evident aesthetic reasons, boasting in their simplicity an excellent architectural solution but, above all, to make it easier to control and communicate in different environments and, last but not least, to allow visitors to visit the clean rooms directly from the corridors around the areas of production.

    The thickness of the glass walls is always 45 – 50 mm, composed of a double layer of 3 – 4 mm laminated safety glass. The width and height of these glass walls, follow very precise rules envisaged by ultra-med, once again to distinguish the design of the product.

    It is possible to customize the glass panels inserting screen prints with your company logo.

    Full glass panel walls:

    Complete system with glass walls and doors perfectly flush with the partition walls. Consistent thickness of 45 – 50 mm.
    To exploit the sunlight, to make supervision and communication easier, to allow your customers to view your work from the visitor corridor.
    Standard module dimensions FULL GLASS: 1180 x h. 2000 mm.

  • HPL wall

    The HPL partition wall is a structure with a thickness of 45 mm, made of 2 x 4 mm thick external HPL panels and internal insulation, which vary according to the project requirements.

    Each panel made is completely sealed on all 4 sides, using extruded aluminum profiles, designed to create the structure and complete closure of the internal insulation.

    ultra-med supplies different types of insulation: rock wool (RW), polystyrene (EPS), aluminum and paper honeycomb (HC), polyurethane (PUR).

    In all cases, the densities of such insulations are extremely high, so as to guarantee superior mechanical stability of the wall itself.

  • Galvanized Steel Wall

    The Galvanized Steel (GS) partition wall is a structure with a thickness of

    50 mm, made of 2 x 0.6 mm thick external Galvanized Steel panels, 2 x 5 mm flameproof board and internal insulation, which vary according to the project requirements.

    Each panel made is completely sealed on all 4 sides, using special profiles, designed to create the structure and complete closure of the internal insulation.

    Ultra-med supplies different types of insulation: rock wool (RW), polystyrene (EPS), aluminum and paper honeycomb (HC), polyurethane (PUR).

    In all cases, the densities of such insulations are extremely high, so as to guarantee superior mechanical stability of the wall itself.

Start typing and press Enter to search

Shopping Cart